HXTT28 28m Electric Telescopic Boom Lift for Sale

Reach High and Distant Work Areas

Many aerial work platforms can reach the required height but do not provide enough horizontal outreach. This may force operators to reposition the machine repeatedly or prevent them from reaching areas above obstacles.

The HXTT28 provides a 28m maximum working height, 26m platform height, 21.7m horizontal outreach and 21.1m crossing height.

Its straight telescopic boom enables direct access to building façades, roofs, steel structures and elevated equipment. The large working range helps reduce unnecessary machine movements and improves efficiency on large jobsites.

The HXTT28 is suitable for:

· Building façade installation

· Steel structure construction

· Factory equipment maintenance

· Airport and station maintenance

· Electrical and lighting installation

· Roofing and cladding work

· Large commercial facility maintenance

Carry More Workers and Tools

Limited platform capacity can increase the number of lifting cycles required to transport workers, tools and materials.

The HXTT28 provides a 300kg unrestricted platform capacity and a 460kg restricted platform capacity. Its 2.44 × 0.91m working platform offers practical space for approximately two to three operators, subject to the permitted load and working zone.

The higher-capacity working zone allows operators to carry additional tools and materials, reducing repeated trips between the platform and the ground.

An integrated weighing system monitors the platform load and helps prevent operation beyond the permitted capacity.

Reduce Noise and Exhaust Emissions

Diesel boom lifts may produce exhaust emissions and high operating noise, making them unsuitable for enclosed buildings, urban projects and noise-sensitive sites.

The HXTT28 uses an 80V/560Ah battery system, providing zero exhaust emissions at the point of use and lower operating noise than conventional diesel equipment.

It is suitable for factories, warehouses, airports, railway stations, exhibition centers, commercial complexes and emission-controlled construction areas.

Electric power also eliminates several diesel-engine maintenance items, including engine oil changes, fuel-filter replacement and exhaust-system servicing.

Powerful Electric Drive for Outdoor Jobsites

Some buyers are concerned that an electric boom lift may not provide sufficient travel power for outdoor construction work.

The HXTT28 is equipped with four 5.4kW travel motors, 45% gradeability and 0.33m ground clearance. These specifications provide practical mobility for construction and industrial jobsites.

The floating steering axle and axle-balancing system help keep the wheels in contact with the ground while travelling. A steering angle sensor automatically coordinates the speed of the travel motors, supporting smoother steering and reducing unnecessary stress on tires and mechanical components.

The machine has a stowed travel speed of 0–5.5km/h and an elevated travel speed of 0–0.8km/h.

Reduce Frequent Machine Repositioning

Repeatedly moving a large boom lift consumes time and may be difficult on a congested jobsite.

The HXTT28 provides continuous 360° turntable rotation and 160° platform rotation. Once the chassis is positioned correctly, operators can access different sides of the working area without frequently relocating the entire machine.

Full proportional controls support precise boom movement. A pressure sensor automatically regulates hydraulic pressure, helping the machine lift and lower more smoothly.

This improves positioning efficiency when working around buildings, structural columns, production equipment and other obstacles.

Multiple Operator Protection Systems

Safety and emergency functions are important considerations when purchasing a high-reach aerial work platform.

The HXTT28 is equipped with:

· Full proportional control

· Platform automatic leveling

· Platform load-sensing system

· Tilt protection

· Anti-entrapment system

· Emergency stop system

· Emergency lowering system

· Upper-limit protection

· Movement sound and light alarms

· Fault information display

· Intelligent speed control

· Steering angle sensor

· Axle-balancing system

· Built-in equipment data recorder

The machine also includes a 24V/1.6kW emergency power unit. If the main system cannot lower the platform normally, the emergency unit can assist with controlled descent.

The built-in data recorder stores machine operating information. If an abnormal condition occurs, technicians can review the relevant data to support troubleshooting.

Comfortable and Precise Platform Operation

The HXTT28 uses an aluminum-alloy work platform, proportional controls, thumb-rocker steering and automatic platform leveling.

The platform rotates 80° to each side, providing a total rotation range of 160°. Operators can make small positioning adjustments directly from the platform instead of moving the entire chassis.

Smooth hydraulic movement helps reduce sudden platform motion during lifting, lowering and boom adjustment, improving operator confidence during precision work.

Lower Routine Maintenance Requirements

Equipment downtime and long-term maintenance costs are common concerns for buyers and rental companies.

The electric power system eliminates many engine-related maintenance tasks. Four electric travel motors provide direct drive, while the fault display and built-in data recorder help service personnel locate potential problems more efficiently.

Regular inspections and maintenance are still required, but the absence of a diesel engine helps reduce routine engine servicing and can simplify daily equipment management.

Main Specifications of the HXTT28

The HXTT28 has a maximum working height of 28m, a maximum platform height of 26m, a maximum horizontal outreach of 21.7m and a maximum crossing height of 21.1m.

Its overall dimensions in the stowed position are 11.75m long, 2.49m wide and 3.03m high. The wheelbase is 3.2m, the ground clearance is 0.33m, and the total machine weight is approximately 16,250kg.

The platform measures 2.44 × 0.91m and supports 300kg unrestricted capacity or 460kg restricted capacity. Platform rotation is 160°, and the turntable provides continuous 360° rotation.

The machine uses an 80V/560Ah battery, four 5.4kW drive motors, a 24kW pump motor, a 160L hydraulic system and 12VDC control voltage.

Its inner turning radius is 3.5m, outer turning radius is 6.9m, and tire size is 385×65-24.

Suitable for Rental Fleets and International Buyers

The HXTT28 is suitable for construction contractors, industrial users, equipment rental companies and machinery distributors.

Its combination of 28m working height, long horizontal outreach, dual platform capacity and electric power enables it to support a wide range of indoor and outdoor projects.

HXT can provide product specifications, machine photos, operating videos, spare-parts information, operation documents and international shipping support.

Before ordering, buyers can provide their required working height, expected platform load, jobsite conditions and destination port. HXT will recommend a suitable configuration and delivery solution.

Choose the Right Electric Boom Lift for Your Project

Choosing a boom lift is not only about maximum height. Buyers should also consider horizontal outreach, platform capacity, ground conditions, transport dimensions, charging facilities and after-sales support.

The HXT HXTT28 electric telescopic boom lift combines long-reach access, 300kg/460kg platform capacity, electric power and intelligent control systems in one self-propelled machine.

Contact HXT for the latest HXTT28 price, technical information, optional configurations, production schedule and international shipping quotation.

FAQ：

1. What is the maximum working height of the HXTT28?

The HXT HXTT28 provides a maximum working height of 28m and a maximum platform height of 26m.

2. Can the HXTT28 carry 460kg at every boom position?

No. The machine uses a dual-capacity working envelope. The unrestricted platform capacity is 300kg, while 460kg is available within the specified restricted working zone. Operators must follow the load chart and operating manual.

3. Is the HXTT28 suitable for outdoor work?

Yes. It provides 45% gradeability, 0.33m ground clearance, four electric travel motors and an axle-balancing system. The machine must be operated on ground and within weather conditions permitted by the manufacturer.

4. What happens if the main power system fails while the platform is raised?

The HXTT28 is equipped with an emergency lowering system and a 24V/1.6kW emergency power unit, which can assist with controlled platform descent if the normal lowering system is unavailable.

5. How can I confirm whether the HXTT28 is suitable for my project?

Provide HXT with the required working height, horizontal outreach, platform load, ground conditions, daily operating time, access dimensions and destination country. HXT can then recommend a suitable machine configuration and shipping solution.